This nylon crane pad utilizes the compressive strength and toughness of high molecular weight nylon to evenly distribute the concentrated weight of crane outriggers onto the ground. Its dead weight is far less than steel plates of the same volume, making it easy for workers to carry and position on site, and it does not rust when in contact with mud, water, or oil. Pad dimensions and thickness can be customized according to crane tonnage and outrigger chassis shape.
Core Component Material Specifications
|
Component |
Material & Specification |
Function |
|
Pad Body |
MC nylon, thickness 30-100mm |
Bears outrigger concentrated loads, distributes pressure |
|
Anti-slip Grooves |
Machined grid or U-shaped grooves |
Increases friction with ground and outriggers, prevents slipping |
|
Lifting Holes |
Pre-embedded lifting ring holes or through holes |
Facilitates forklift or manual handling of large pads |
|
Edge Treatment |
Chamfering or edge wrapping |
Prevents edge chipping under heavy pressure, protects operator safety |
Product Advantages
Lightweight and Easy to Handle: Under the same load capacity, nylon pads weigh only about 1/7 of steel plates, greatly reducing worker handling intensity.
Insulating and Spark-free: Nylon is non-conductive and does not generate sparks on impact, suitable for use near electrical equipment or in flammable and explosive environments.
Impact Toughness: Nylon absorbs energy during instantaneous impact from crane outrigger deployment, making it less prone to brittle fracture.
Corrosion-resistant and Rust-free: When used outdoors during rainy seasons or on waterlogged sites, it will not rust and seize like steel plates.

FAQ
Q: Will the nylon crane pad crack during outdoor construction in extreme cold winter?
A: Conventional nylon loses toughness at extremely low temperatures. For winter construction in northern regions, it is recommended to use low-temperature toughened modified nylon materials to avoid cracking from severe impact below -20°C.
Q: What if the area of a single pad is insufficient for a large-tonnage crane?
A: The ground pressure can be reduced by increasing the pad's bottom area, or multiple pads can be placed side by side and spliced together, with a thick steel plate laid on top to evenly transfer the load to the nylon pads below.
Q: What if the pad surface is contaminated with engine oil and becomes slippery?
A: Before operation, wipe off surface oil with a cloth dipped in cleaning agent. For long-term use in oily workshops, modified nylon with better oil resistance can be selected, or deeper anti-slip textures can be reserved on the pad surface.
Hot Tags: nylon crane pad, China nylon crane pad manufacturers, suppliers, factory, 16mm nylon rod, cast nylon sheet, hex plastic rod, nylon round bar, pa6 nylon plate, pa6 rod


