The mc nylon blue body has a solid structure and can be drilled, milled or turned into many simple shapes. The blue surface is helpful in busy stores because it is easy to see and less likely to be mixed with white or black plastics. The stock should be kept clean before cutting, as deep dents may remain on the final part. During machining, slow and steady cutting gives a neater edge. When the part works as a sliding pad, smooth counterface contact is better than rough steel with sand.
Product Parameters
|
Parameter |
Value |
|
Material |
Cast nylon / PA6 |
|
Color |
Blue |
|
Density |
About 1.15 g/cm³ |
|
Tensile strength |
About 72 MPa |
|
Friction coefficient |
About 0.22 |
|
Working temperature |
-40°C to 100°C |
Product Advantages
1. The blue surface is easy to find before and after machining.
2. MC nylon blue can reduce running noise in some wheel and pad uses.
3. It can be worked with normal shop tools when the tool is sharp.
Components
The order can include blue nylon blanks, protective film or bag, size labels, cartons and pallet packing. Special cut blanks can carry a simple mark for quick sorting.
Main Applications
1. Small guide wheels for light conveyor or packing lines.
2. Wear pads and lining pieces for machine contact areas.
3. Bushes, rings and simple spacers made from rod or sheet.
FAQ
Q: Can the blue nylon be supplied as rod?
A: Yes. Rod, sheet and block are common supply forms.
Q: Is it used only for wheels?
A: No. It can also be made into pads, bushes, sleeves and spacers.
Q: How should mc nylon blue be kept before use?
A: Store it flat or on a rack, keep it dry, and avoid direct heat.
Hot Tags: mc nylon blue, China mc nylon blue manufacturers, suppliers, factory
