The material mc901 has a firm PA6 cast nylon body with a smooth outer surface. It can be cut to small blanks before machining, so the workshop does not need to remove too much waste. Blue color helps workers find it quickly on a rack and separate it from natural nylon or POM stock. When the part is turned on a lathe, sharp tools and steady feed help the edge stay clean. For sliding use, the running face should be kept away from sharp sand and heavy impact because these conditions can shorten service life.
Product Parameters
|
Parameter |
Value |
|
Material |
Cast PA6 nylon |
|
Color |
Blue / natural |
|
Density |
1.15 g/cm³ |
|
Tensile strength |
About 75 MPa |
|
Friction coefficient |
About 0.20 dry sliding |
|
Working temperature |
-40°C to 100°C |
Product Advantages
Material mc901 is easy to machine when speed and feed are controlled.
The blue color makes stock checking simple before cutting.
It weighs less than steel parts of similar size and is easier to carry.
Components
A normal order can include nylon sheet, rod or block, protective wrapping, size labels and carton or pallet packing. Cut pieces can be marked by length, width and thickness.
Main Applications
1. Conveyor guide wheels, small rollers and side wear strips.
2. Bushings, sleeves, washers and spacer pads made by turning.
3. Machine repair pieces where low noise and lower weight are useful.
FAQ
Q: Can it be cut by drawing?
A: Yes. Sheet, rod and block can be cut after the size is confirmed.
Q: Does the blue shade always stay the same?
A: The color is normally blue, but a small shade change can happen between batches.
Q: How should material mc901 be stored?
A: Keep it dry, flat and away from direct heat before machining.
Hot Tags: material mc901, China material mc901 manufacturers, suppliers, factory
